Education

Inside of a Kvant ClubMAX 3000 laser projector. What is an RGB laser? Defining an RGB laser light projector show An RGB laser projector is a type of laser show system that consists of three different sources, one for red, green,...

Read now

One of the most commonly asked questions that receive at Pangolin is, “How do we control our laser projector?”. With the latest innovations in laser show control technology, it can be quite easy to get confused on what to use,...

Read now

In this new Pangolin Laser Tutorial, official training partner Francesco van Loon, is going to walk you through the basics of controlling your lasers, from a lighting console.  Here is what you will learn: How to configure lasers for easy...

Read now

Laser mapping has emerged as one of the hottest effects being created in the lighting design and architectural scene.  The Pangolin team has been hard at work, trying to make laser mapping easier for lighting designers and artists around the...

Read now

In this blog post, we are going to show you how to use Pangolin laser show software, and laser control hardware, to run laser shows in true "auto mode" with no PC or console, connected in the setup. To begin,...

Read now

HOW TO DESIGN A LASER SHOW What laser show software is right for you In order to create a real laser show, you need laser design and control software. These programs are required in order to create laser shows and...

Read now

HOW TO DESIGN A LASER SHOW What laser show software is right for you In order to create a real laser show, you need laser design and control software. These programs are required in order to create laser shows and...

Read now

When ever we are talking about laser output with Pangolin software, we are also talking about Pangolin's exclusive ILDA-Award-winning Projection Zones technology, which allows to use separate projection areas (zones) either from a single laser projector, or up to many...

Read now

The chart below lists pins for the ILDA DB-25F female connector. This connector conforms to the ILDA DB-25 connector standard. The ILDA standard uses differential signals for projector inputs, primarily because they are more immune to noise. For example, you...

Read now
Close